View; Face View - For Cylindrical Grinding; Further Side Views - For Surface Grinding - Siemens SINUMERIK 840D sl Operating Manual

Simulating machining
7.6 Different views of a workpiece
7.6.4 3D view
Displaying the 3D view
Changing the display
You can enlarge, reduce, pan, and rotate the simulation graphic and the segment.
Displaying and moving cutting planes
You can display and move cutting planes X, Y, and Z.
7.6.5

Face view - for cylindrical grinding

Displaying the face view
Changing the display
You can enlarge, reduce, pan, and rotate the simulation graphic and the segment.
7.6.6

Further side views - for surface grinding

Displaying further side views
186
1. Simultaneous recording or simulation is started.
2. Press the "Other views" and "3D view" softkeys.
Software option
You require the option "3D simulation (finished part)" for the simulation.
1. Simultaneous recording or simulation is started.
2. Press the "Further views" and "Face view" softkeys.
The face view shows the workpiece in the X-Y plane.
1. Simultaneous recording or simulation is started.
2. Press the "Further views" softkey.
Operating Manual, 05/2017, A5E40869190
Grinding