Alarm, fault, and system messages
15.4 Sorting, alarms, faults and messages
Procedure
15.4
Sorting, alarms, faults and messages
If a large number of alarms, messages or alarm logs are displayed, you have the option of
sorting these in an ascending or descending order according to the following criteria:
● Date (alarm list, messages, alarm log)
● Number (alarm list, messages)
As a consequence, for every extensive lists, you can obtain the required information faster.
Procedure
...
356
1.
Select the "Diagnostics" operating area.
2.
Press the "Alarm log" softkey.
The "Alarm Log" window opens.
All of the coming and going events - that have occurred since the HMI
was started - are listed.
3.
Press the "Display new" softkey to update the list of displayed alarms/
messages.
4.
Press the "Save Log" softkey.
The log that is currently displayed is stored as text file alarmlog.txt in the
system data in directory card/user/sinumerik/hmi/log/alarm_log.
1.
Select the "Diagnostics" operating area.
2.
Press the softkey "Alarm list", "Messages" or "Alarm log" to display the
requested messages and alarms.
3.
Press the "Sort" softkey.
The list of entries is sorted in ascending order according to date, i.e. the
most recent information is at the end of the list.
4.
Press the softkey "Descending" to sort the list in a descending order.
The most recent event is shown at the beginning of the list.
Operating Manual, 05/2017, A5E40869190
Grinding