Grinding Data - Siemens SINUMERIK 840D sl Operating Manual

Parameter
Tool size
Tool OEM parameters
1 - 6
13.12.3

Grinding data

The "Tool Details" window provides the following data on the selected tool when the "Tool
data" softkey is active.
Parameter
Magazine location
Tool name
ST
D quantity
D
Minimum wheel radius
Actual wheel radius
Minimum wheel width
Actual wheel width
Maximum speed
Maximum
peripheral velocity
Angle of inclined wheel
Spindle number
Parameter for calculating the
radius
Chaining rule
Grinding
Operating Manual, 05/2017, A5E40869190
Meaning
W Tool being changed
P Tool in fixed location
The tool is permanently assigned to this magazine location
I Tool has been in use
Standard Tool does not require an additional location in a magazine.
Oversize The tool occupies two half locations left, two half locations right, one half
location top and one half location bottom in a magazine.
Special size
Left Number of half locations to the left of the tool
Right Number of half locations to the right of the tool
Freely available pa‐
rameters
Meaning
The magazine number is specified first, followed by the location number in the magazine.
If there is only one magazine, only the location number is displayed.
The tool is identified by the name and the sister tool number. You can enter the name as
text or number.
Sister tool number (for replacement tool strategy)
Number of created cutting edges
Cutting edge number
Specifies the minimum wheel radius
Specifies the actual wheel radius.
Specifies the minimum wheel width
Specifies the actual wheel width
Specifies the maximum speed
Specifies the maximum peripheral velocity.
Specifies the angle of inclined wheel
Specifies the spindle number
Selected parameter for the radius calculation
This parameter defines which tool parameters of tool cutting edge 2 (D2) and tool cutting
edge 1 (D1) have to be chained to one another.
Manage tools
13.12 Tool details
291