Tool-Specific Grinding Data - Siemens SINUMERIK Series Function Manual

W4: Grinding-specific tool offset and tool monitoring
17.1 Tool offset for grinding operations
This structure can be used to create the following tool types:
Type
400
401
402
403
410
411
412
413
490
17.1.3

Tool-specific grinding data

Tool-specific grinding data
Tool-specific grinding data is available once for every T number (type 400- 499). The data is
automatically set up with every new grinding tool (type 400 - 499).
Note
Tool-specific grinding data has the same characteristics as a tool edge.
This is to be taken into account when the number of cuts is specified:
MD18100 $MN_MM_NUM_CUTTING_EDGES_IN_TOA
When all the cutting edges of a tool are deleted, the existing tool-specific grinding data is
deleted at the same time.
Parameters
The parameters are assigned as follows:
Parameter
$TC_TPG1
$TC_TPG2
$TC_TPG3
$TC_TPG4
$TC_TPG5
$TC_TPG6
$TC_TPG7
$TC_TPG8
$TC_TPG9
806
Description
Surface grinding wheel
Surface grinding wheel with monitoring with tool base dimension for GWPS
Surface grinding wheel without monitoring without tool base dimension for GWPS
Surface grinding wheel with monitoring without tool base dimension for GWPS
Facing wheel
Facing wheel with monitoring with tool base dimension for GWPS
Facing grinding wheel without monitoring without tool base dimension for GWPS
Facing wheel with monitoring without tool base dimension for GWPS
Dresser
Meaning
Spindle number
Chaining rule
Minimum wheel radius
Minimum wheel width
Current wheel width
Maximum speed
Maximum peripheral speed
Angle of inclined wheel
Parameter number for radius calculation
Data type
Integer
Integer
Real
Real
Real
Real
Real
Real
Integer
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions