Siemens SINUMERIK Series Function Manual page 5

Information on structure and contents
Installation
Structure of this Function Manual:
● Inner title (page 3) with the title of the Function Manual, the SINUMERIK controls as well
● Description of the functions in alphabetical order (e.g. A2, A3, B1, etc.)
● Appendix with:
● Index of terms
Note
For detailed descriptions of data and alarms see:
• For machine and setting data:
• For NC/PLC interface signals:
• For alarms:
Notation of system data
The following notation is applicable for system data in this documentation:
Signal/Data Notation
NC/PLC interface ... NC/PLC interface signal:
signals
<signal address> (<signal name>)
Machine data ... machine data:
<Type><Number> <Complete
Designator> (<Meaning>)
Setting data ... setting data:
<Type><Number> <Complete
Designator> (<Meaning>)
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
as the software and the version for which this version of the Function Manual is
applicable and the overview of the individual functional descriptions.
– List of abbreviations
– Documentation overview
Detailed description of machine data (only electronically on DOConCD or DOConWEB)
– Function Manual, Basic Functions; NC/PLC Interface Signals (Z1)
– Function Manual, Basic Functions; NC/PLC Interface Signals (Z2)
– Function Manual, Special Functions; NC/PLC Interface Signals (Z3)
Diagnostics Manual
Example
When the new gear stage is engaged, the following NC/PLC
interface signals are set by the PLC program:
DB31, ... DBX16.0-2 (actual gear stage A to C)
DB31, ... DBX16.3 (gear is changed)
Master spindle is the spindle stored in the machine data:
MD20090 $MC_SPIND_DEF_MASTER_SPIND (position of
deletion of the master spindle in the channel)
The logical master spindle is contained in the setting data:
SD42800 $SC_SPIND_ASSIGN_TAB[0] (spindle number
converter)
Preface
5