Switch On - Siemens SINUMERIK Series Function Manual

Example
MD24820 $MC_TRACYL_BASE_TOOL_<t>[ 0 ] = tx
MD24820 $MC_TRACYL_BASE_TOOL_<t>[ 1 ] = ty
MD24820 $MC_TRACYL_BASE_TOOL_<t>[ 2 ] = tz
Where <t> = number of TRACYL transformations defined in the transformation data records
Figure 6-13
See also
TRACYL cylinder surface transformation (option) (Page 366)
6.3.3

Switch on

The TRACYL transformation is activated in the part program or synchronous action using the
TRACYL
Syntax
TRACYL(<d>[, <n>][, <k>])
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Cylinder coordinate system
command.
6.3 TRACYL cylinder surface transformation (option)
M1: Kinematic transformation
375