Siemens SINUMERIK Series Function Manual page 580

N4: Own channel - only 840D sl
9.4 Automatic path segmentation
MD26016 $MC_PUNCH_PARTITION_TYPE=0 (default setting)
With this setting, the axes behave as standard, i.e. the programmed special axis motions are
distributed among the generated intermediate blocks of the active path segmentation
function in all interpolation modes.
In block
axis response is the same in block
each with 15° axis rotation).
580
, the C axis is rotated through 15° in each of the three intermediate blocks. The
N20
, in the case of circular interpolation (three sub-blocks,
N30
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions