Setting Data; Axis/Spindle-Specific Setting Data; Signals; Signals To Axis/Spindle - Siemens SINUMERIK Series Function Manual

11.6.2

Setting data

11.6.2.1

Axis/spindle-specific setting data

Number Identifier: $SA_
43700 OSCILL_REVERSE_POS1
43710 OSCILL_REVERSE_POS2
43720 OSCILL_DWELL_TIME1
43730 OSCILL_DWELL_TIME2
43740 OSCILL_VELO
43750 OSCILL_NUM_SPARK_CYCLES
43760 OSCILL_END_POS
43770 OSCILL_CTRL_MASK
43780 OSCILL_IS_ACTIVE
43790 OSCILL_START_POS
11.6.3

Signals

11.6.3.1

Signals to axis/spindle

Signal name
External oscillation reversal
Set reversal point
Alter reversal point
Stop at next reversal point
Stop along braking ramp
PLC-controlled axis
11.6.3.2

Signals from axis/spindle

Signal name
Oscillation reversal is active
Oscillation cannot start
Error during oscillation movement
Sparking-out active
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Description
Position at reversal point 1
Position at reversal point 2
Stop time at reversal point 1
Stop time at reversal point 2
Feed velocity of oscillation axis
Number of sparking-out strokes
Position after sparking-out strokes/at end of oscillation
movement
Control screen form for oscillation
Oscillation movement ON/OFF
Position that is approached after oscillation before reversal
point 1, if activated in SD43770:
SINUMERIK 840D sl
DB31, ... .DBX28.0
DB31, ... .DBX28.3
DB31, ... .DBX28.4
DB31, ... .DBX28.5
DB31, ... .DBX28.6
DB31, ... .DBX28.7
SINUMERIK 840D sl
DB31, ... .DBX100.2
DB31, ... .DBX100.3
DB31, ... .DBX100.4
DB31, ... .DBX100.5
P5: Oscillation - only 840D sl
11.6 Data lists
SINUMERIK 828D
-
-
-
-
-
-
SINUMERIK 828D
-
-
-
-
677