Siemens SINUMERIK Series Function Manual page 799

t :
1
t :
2
t :
3
t :
4
t :
5
Figure 16-1
Then, in
● The new tool offset can be selected
● the axes can be returned to the contour, or
● the spindle can be accelerated.
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Axes stationary.
Spindle rotates.
Start of tool change cycle in
Move axes to tool change point with
Spindle reaches programmed position from block
Axes reach exact stop coarse from
removes the previous tool from the spindle and loads and clamps the new tool.
M06
Tool changer swivels back to original position.
Chronological sequence of tool change
of the calling main program:
N1000
N10.
in .
G75 N20
N10
; thus begins:
N20 N30
.
W3: Tool change
16.8 Examples
799