Data Lists; Machine Data; General Machine Data; Channel-Specific Machine Data - Siemens SINUMERIK Series Function Manual

5.6

Data lists

5.6.1

Machine data

5.6.1.1

General machine data

Number Identifier: $MN_
10010 ASSIGN_CHAN_TO_MODE_GROUP[n]
10722 AXCHANGE_MASK
5.6.1.2

Channel-specific machine data

Basic machine data of channel
Number Identifier: $MC_
20000 CHAN_NAME
20050 AXCONF_GEOAX_ASSIGN_TAB[n]
20060 AXCONF_GEOAX_NAME_TAB[n]
20070 AXCONF_MACHAX_USED[n]
20080 AXCONF_CHANAX_NAME_TAB[n]
20090 SPIND_DEF_MASTER_SPIND
20100 DIAMETER_AX_DEF
20110 RESET_MODE_MASK
20112 START_MODE_MASK
20150 GCODE_RESET_VALUES[n]
20160 CUBIC_SPLINE_BLOCKS
20170 COMPRESS_BLOCK_PATH_LIMIT
20200 CHFRND_MAXNUM_DUMMY_BLOCKS
20210 CUTCOM_CORNER_LIMIT
20220 CUTCOM_MAX_DISC
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
K5: Mode groups, channels, axis interchange
Description
Channel valid in mode group [Channel No.]: 0, 1
Parameterization of the axis replacement response
Description
Channel name
Assignment of geometry axis to channel axis
[GEOAxisNo.]: 0...2
Geometry axis name in channel
[GEOAxisNo.]: 0...2
Machine axis number valid in channel
[Channel axis No. ]: 0...7
Name of channel axis in the channel
[Channel axis No.]: 0...7
Initial setting of master spindle in channel
Geometry axis with transverse axis function
Determination of basic control settings after Reset/TP
End
Determination of basic control settings after NC start
Reset G groups
[G-Group No.]: 0...59
Number of blocks for C spline
Maximum traversing length of NC block for
compression
Empty blocks with phase/radii
Max. angle for intersection calculation with tool radius
compensation
Maximum value with DISC
5.6 Data lists
343