Displaying Setting Data Lists - Siemens SINUMERIK 840D sl Operating Manual

Parameter
ZC1
Jaw type
ZC3
ZS3
ZE3
XR
ZR
2.9

Displaying setting data lists

You can display lists with configured setting data.
Procedure
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Description
Main spindle chuck dimensions (inc)
Dimensions of the forward edge or stop edge
Jaw type 1
•
Jaw type 2
•
Chuck dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up
Stop dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up
Jaw dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up and "Jaw type 2"
Tailstock diameter - only for tailstock that has been set-up
Tailstock length - only for tailstock that has been set-up
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Setting data" and "Data lists" softkeys.
The "Setting Data Lists" window opens.
3. Press the "Select data list" softkey and in the "View" list, select the
required list with setting data.
Setting up the machine
2.9 Displaying setting data lists
Unit
mm
mm
mm
mm
mm
mm
95