Siemens SINUMERIK 840D sl Operating Manual page 369

Procedure
Parameters, G code program
PRG Name of the program to be generated
PL Machining plane
RP Retraction plane – (only for
longitudinal machining
direction)
SC Safety clearance
F Feedrate
CON Name of the updated blank contour for residual
material machining (without the attached
character "_C" and double-digit number)
Residual With subsequent residual material removal
material
Yes
•
No
•
CONR Name to save the updated unmachined-part
contour for residual material removal - (only
"Yes" for residual material removal)
parameters Description
Machining
•
•
Machining
•
direction
•
Position
•
•
•
•
D Maximum depth infeed - (only for ∇)
XDA 1. Grooving limit tool (abs) – (only for face machining direction)
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
1. The part program or ShopTurn program to be processed has been
created and you are in the editor.
2. Press the "Contour turning" softkey.
3. Press the "Grooving residual material" softkey.
The "Grooving residual material" input window is opened.
mm
mm
*
∇ (roughing)
∇∇∇ (finishing)
Face
Longitudinal
front
back
internal
external
Programming technology functions (cycles)
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
8.3 Contour turning
mm/rev
rpm
m/min
Unit
mm
mm
369