Multi-Channel Functionality For Large Operator Panels - Siemens SINUMERIK 840D sl Operating Manual

9.2.4

Multi-channel functionality for large operator panels

For the large OP15, OP019 operator panels as well as at the PC, there is more space in the
"Machine", "Program" and "Parameter" operating areas – as well as in all lists – to display
NC blocks, tools etc.
Further, you also have the option of simultaneously displaying more than 2 channels.
This makes it easier for you to identify the machine situation for machines with 3 and more
channels. Further, it makes it simpler for you to generate and run-in three or four-channel
programs.
Supplementary conditions
● OP15, OP19 or PC with a display of at least 1280x1024 pixels
● For operating an OP019, at least one NCU720.2 or 730.2 with 1 GB of RAM or a PCU50
3 / 4-channel view in the "Machine" operating area
If you have selected 3 channels via settings, then 3 or 4 channel columns are displayed next
to one another.
Channel view
3-channel view
4-channel view
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Software options
If you require the option "programSYNC" for the views described here.
is required
Display in the "Machine" operating area
The following windows are displayed one above the other for each channel:
Actual value window
•
T,F,S window
•
Block display window
•
The following windows are displayed one above the other for each channel:
Actual value window
•
T,S,F window
•
G functions (the "G functions" softkey is omitted)
•
Block display window
•
Multi-channel machining (only 840D sl)
9.2 Multi-channel support (only 840D sl)
539