Multi-Channel Functionality For Large Operator Panels - Siemens SINUMERIK 840D sl Turning Operating Manual

Multi-channel machining
11.2 Multi-channel support
11.2.4

Multi-channel functionality for large operator panels

For the large OP 015, OP 019 operator panels as well as at the PC, there is more space in the
"Machine", "Program" and "Parameter" operating areas – as well as in all lists – to display NC
blocks, tools etc.
Further, you also have the option of simultaneously displaying more than 2 channels.
This makes it easier for you to identify the machine situation for machines with 3 and more
channels. Further, it makes it simpler for you to generate and run-in three or four-channel
programs.
Supplementary conditions
● OP 015, OP 019 or PC with a display of at least 1280x1024 pixels
● For operating an OP 019, at least one NCU720.2 or 730.2 with 1 GB of RAM or a PCU50 is
required
3 / 4-channel view in the "Machine" operating area
If you have selected 3 channels via settings, then 3 or 4 channel columns are displayed next to
one another.
Channel view
3-channel view
4-channel view
Displaying functions
Channel view
3-channel view
4-channel view
672
Software options
If you require the option "programSYNC" for the views described here.
Display in the "Machine" operating area
The following windows are displayed one above the other for each channel:
● Actual value window
● T,F,S window
● Block display window
The following windows are displayed one above the other for each channel:
● Actual value window
● T,S,F window
● G functions (the "G functions" softkey is omitted)
● Block display window
Display in the "Machine" operating area
Selection using vertical softkeys:
● The T,F,S window is overlaid by pressing one of the vertical softkeys.
● The window showing the G codes is overlaid if you press one of the vertical
softkeys.
Selection using horizontal softkeys:
Operating Manual, 06/2019, A5E44903486B AB
Turning