Siemens SINUMERIK 840D sl Turning Operating Manual page 392

Programming technology functions (cycles)
10.1 Drilling
Parameter Description
Face Y:
Z0 Z coordinate of the reference point (abs)
CP Positioning angle for machining area
Angle CP does not have any effect on the machining position in relation to the workpiece.
It is only used to position the workpiece with the rotary axis C in such a way that machining
is possible on the machine.
X coordinate of the reference point – first position (abs)
X0
Y coordinate of the reference point – first position (abs)
Y0
Angle of rotation of line in relation to the X axis
α0
(only for Shop‐ Positive angle: Line is rotated counter-clockwise.
Turn)
Negative angle: Line is rotated clockwise.
Peripheral surface C:
X0 Cylinder diameter ∅ (abs)
Y0 Y coordinate of the reference point – first position (abs)
Z0 Z coordinate of the reference point – first position (abs)
α0 Angle of rotation of line with reference to Y axis
(only for Shop‐
Positive angle: Line is rotated counter-clockwise.
Turn)
Negative angle: Line is rotated clockwise.
Peripheral surface Y:
X0 X coordinate of the reference point (abs)
C0 Positioning angle for machining surface
Y0 Y coordinate of the reference point – first position (abs)
Z0 Z coordinate of the reference point – first position (abs)
α0 Angle of rotation of line with reference to Y axis
(only for Shop‐
Positive angle: Line is rotated counter-clockwise.
Turn)
Negative angle: Line is rotated clockwise.
L0 Distance of the 1st position to reference point
L Distance between the positions
N Number of positions
392
Operating Manual, 06/2019, A5E44903486B AB
Unit
mm
Degrees
mm
mm
Degrees
mm
mm
mm
Degrees
mm
Degrees
mm
mm
Degrees
mm
mm
Turning