Siemens SINUMERIK 840D sl Turning Operating Manual page 128

Setting up the machine
4.9 Monitoring axis and spindle data
Tailstock
Dimensioning tailstock main spindle
Procedure
See also
Machining with movable counterspindle (Page 649)
Parameter
Main spindle
ZC1
ZS1
ZE1
XR
ZR
Counter-spindle
128
1. Select the "Parameter" operating area.
2. Press the "Setting data" and "Spindle chuck data" softkeys.
The "Spindle Chuck Data" window opens.
3. Enter the desired parameter.
The settings become active immediately.
Description
Dimensions of the forward edge or stop edge
● Jaw type 1
● Jaw type 2
Main spindle chuck dimensions (inc)
Main spindle stop dimensions (inc)
Jaw dimension, main spindle (inc) - only for "Jaw type 2"
Tailstock diameter - only for tailstock that has been set-up
Tailstock length - only for tailstock that has been set-up
Dimensions of the forward edge or stop edge
● Jaw type 1
● Jaw type 2
Dimensioning tailstock counter-spindle
Operating Manual, 06/2019, A5E44903486B AB
Unit
mm
mm
mm
mm
mm
Turning