Siemens SINUMERIK 840D sl Turning Operating Manual page 491

Procedure
Parameters in the "Input complete" mode
G code program parameters
Input
PL Machining plane
Milling direction
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
Reference point The following different reference point positions can be selected:
(only for G code)
●
●
●
●
●
The reference point (highlighted in blue) is displayed in the Help screen.
Machining
● Face C
surface
● Face Y
● Peripheral surface C
● Peripheral surface Y
(only for Shop‐
Turn)
Position ● At the front (face)
● At the rear (face)
● Outside (peripheral surface)
(only for Shop‐
● Inside (peripheral surface)
Turn)
Turning
Operating Manual, 06/2019, A5E44903486B AB
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Pocket" and "Rectangular pocket" softkeys.
The "Rectangular Pocket" input window opens.
● Complete
mm
mm
*
(center)
(bottom left)
(bottom right)
(top left)
(top right)
Programming technology functions (cycles)
ShopTurn program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
10.4 Milling
mm/min
mm/tooth
rpm
m/min
Unit
491