Positioning The Spindle - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
5.2.4
Positioning the spindle
Procedure
Note
You can use this function to position the spindle at a specific angle, e.g. during a tool change.
● A stationary spindle is positioned via the shortest possible route.
● A rotating spindle is positioned as it continues to turn in the same direction.
Turning
Operating Manual, 06/2019, A5E44903486B AB
1.
Select the "T,S,M" softkey in the "JOG" mode.
2.
Select the "Stop Pos." setting in the "Spindle M function" field.
The "Stop Pos." entry field appears.
3.
Enter the desired spindle stop position.
The spindle position is specified in degrees.
4.
Press the <CYCLE START> key.
The spindle is moved to the desired position.
Working in manual mode
5.2 Selecting a tool and spindle
141
Advertisement
Table of Contents
