Parameter
Description
BL
Blank description (only for ∇)
● Cylinder (described using XD, ZD)
● Allowance (XD and ZD on the finished part contour)
● Contour (additional CYCLE62 call with blank contour – e.g. cast iron mold)
XD
- (only for ∇ machining)
- (only for blank description, cylinder and allowance)
● For blank description, cylinder
● For blank description, allowance
ZD
- (only for ∇ machining)
- (only for blank description, cylinder and allowance)
● For blank description, cylinder
● For blank description, allowance
Allowance
Allowance for pre-finishing - (only for ∇∇∇)
● Yes
● No
U1
Compensation allowance in X and Z direction (inc) – (only for allowance)
● Positive value: Compensation allowance is kept
● Negative value: Compensation allowance is removed in addition to finishing
* Unit of feedrate as programmed before the cycle call
Hidden parameters
Parameter
Description
Residual material
With subsequent residual material removal
SC
Safety clearance
DI
Continuous cut - (only for ∇)
Set machining area
Set machining area limits
limits
N
Number of grooves
Turning
Operating Manual, 06/2019, A5E44903486B AB
–
Version, absolute:
Cylinder dimension ∅ (abs)
–
Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
–
Allowance on the CYCLE62 finished part contour (inc)
–
Version, absolute:
Cylinder dimension (abs)
–
Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
–
Allowance on the CYCLE62 finished part contour (inc)
U1 contour allowance
allowance
Programming technology functions (cycles)
10.3 Contour turning
Value
Can be set in SD
No
0
No
1
Unit
mm
mm
mm
481