Siemens SINUMERIK 840D sl Turning Operating Manual page 149

Parameters
Z0
X1
Z1
FS1...FS3 or R1...R3
XF2
D
UX
UZ
See also
Tool, offset value, feedrate and spindle speed (T, D, F, S, V) (Page 304)
Turning
Operating Manual, 06/2019, A5E44903486B AB
Description
Reference point (abs)
End point X ∅ (abs) or end point X in relation to X0 (inc)
End point Z (abs) or end point Z in relation to X0 (inc)
Chamfer width (FS1...FS3) or rounding radius (R1...R3)
Undercut (alternative to FS2 or R2)
Infeed depth (inc) – (for roughing only)
Final machining allowance in X direction (inc) – (for roughing only)
Final machining allowance in Z direction (inc) – (for roughing only)
Working in manual mode
5.6 Simple stock removal of workpiece
Unit
mm
mm
mm
mm
mm
mm
mm
mm
149