Protection Levels - Siemens SINUMERIK 840D sl Turning Operating Manual

Introduction
2.4 User interface
2.4.14

Protection levels

The input and modification of data in the control system is protected by passwords at sensitive
places.
Access protection via protection levels
The input or modification of data for the following functions depends on the protection level
setting:
● Tool offsets
● Work offsets
● Setting data
● Program creation / program editing
Note
Configuring access levels for softkeys
You have the option of providing softkeys with protection levels or completely hiding them.
References
For additional information, please refer to the following documentation:
SINUMERIK Operate Commissioning Manual
Softkeys
Machine operating area
64
5. Select Korean character input.
6. Enter the number of the line in which the required character is located.
The line is highlighted in color.
7. Enter the number of the column in which the required character is located.
The character will be briefly highlighted in color and then transferred to
the Character field.
Press the <BACKSPACE> softkey to delete entered phonetic notations.
8. Press the <input> key to enter the character into the input field.
Protection level
End user
(protection level 3)
Operating Manual, 06/2019, A5E44903486B AB
Turning