Siemens SINUMERIK 840D sl Operating Manual page 480

Programming technology functions (cycles)
8.6 Further cycles and functions
Procedure
Parameters, G code program
PL Machining plane
Parameters Description
TC Name of swivel data set
Retract
No: No retraction before swiveling
•
- (only for G
Z: Retraction in the direction of machine axis Z
•
code)
Z, X, Y: Move machining axis to retraction position before swiveling
•
Tool direction, max.: Maximum retraction (up to the software end position) in the
•
tool direction
Tool direction, inc.: Retraction, incremental (up to the software end position) in the
•
tool direction
When retracting in the tool direction, in the swiveled machine state, several axes
can move (travel).
ZR Retraction path - (only for incremental retraction in the tool direction)
Swivel plane
New: New swivel plane
•
- (only for G
Additive: Additive swivel plane
•
code)
RP - (only for Retraction plane for face B
ShopTurn)
C0 - (only for Position angle for machining surface
ShopTurn)
480
1. The part program or ShopTurn program to be processed has been
created and you are in the editor.
2. Select the "Miscellaneous" softkey.
3. Press the "Swivel plane" softkey.
The "Swivel plane" input window opens.
4. Press the "Basic setting" softkey if you wish to reestablish the initial
state, i.e. you wish to set the values back to 0.
This is done, for example, to swivel the coordinate system back to its
original orientation.
Parameters, ShopTurn program
T Tool name
D Cutting edge number
Feedrate
S / V Spindle speed or constant
cutting rate
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
mm/min
mm/rev
rpm
m/min
Unit
mm
Degrees
Turning