Siemens SINUMERIK 840D sl Operating Manual page 265

6. Solid machine residual material
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
If a blank programmed under "CONT_1" is used, under parameter "BL",
the "Contour" blank description should be selected instead of "Cylinder".
When selecting "Cylinder", the workpiece is cut from the solid material.
Stock removal contour
1. Press the "Cont. turn." and "St. remov. resid." softkeys.
The "Stock removal residual material" input window opens.
2. Enter the following technology parameters:
T Roughing tool_55 D1
3. Enter the following parameters:
Machining
Machining direction
Position
Machining direction
D 2inc
Cutting depth
UX
UZ
DI
Relief cuts
FR
Creating a ShopTurn program
7.18 Example: Standard machining
F 0.35 mm/rev V 400 m/min
Roughing (∇)
Longitudinal
external
0.4inc
0.2inc
0
Yes
0.200mm/rev
265