Siemens SINUMERIK 840D sl Operating Manual page 537

Parameter
Spindle chuck
data
ZC
ZS
ZE
Counterspindle
Spindle chuck data
Spindle chuck data
Jaw type
ZC
ZS
ZE
XR
ZR
Mirroring Z
Work offset
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Description
Only chuck
•
You enter spindle chuck data in the program.
Complete
•
You enter tailstock data in the program.
Note:
Please observe the machine manufacturer's instructions.
The main spindle chuck dimensions - (only for spindle chuck data "yes")
•
Stop dimension of the main spindle - (only for spindle chuck data "yes")
•
Jaw dimension of the main spindle for jaw type 2 - (only for spindle chuck data
•
"yes")
Yes
•
You enter spindle chuck data in the program.
No
•
Spindle chuck data are transferred from the setting data.
Note:
Please observe the machine manufacturer's instructions.
Only chuck
•
You enter spindle chuck data in the program.
Complete
•
You enter tailstock data in the program.
Note:
Please observe the machine manufacturer's instructions.
•
Selecting the jaw type of the counterspindle. Dimensions of the front edge or stop
edge - (only if spindle chuck data "yes")
Jaw type 1
•
Jaw type 2
•
The counterspindle chuck dimensions - (only for spindle chuck data "yes")
Stop dimension of the counterspindle - (only for spindle chuck data "yes")
Jaw dimension of the counterspindle for jaw type 2 - (only for spindle chuck data
"yes")
Tailstock diameter - (only for spindle chuck data "complete" and tailstock that has
been set up)
Tailstock length - (only for spindle chuck data "complete" and tailstock that has
been set up)
Yes
•
Mirroring is used when machining on the Z axis
No
•
Mirroring is not used when machining on the Z axis
Selecting the work offset
Multi-channel machining (only 840D sl)
9.2 Multi-channel support (only 840D sl)
Unit
mm
mm
mm
mm
mm
mm
mm
mm
537