Siemens SINUMERIK 840D sl Operating Manual page 271

13. Positioning
14. Milling the rectangular pocket
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
1. Press the "Drilling", "Positions" and "Freely Programmable Positions"
softkeys.
The "Positions" input window opens.
2. Enter the following parameters:
Machined surface
Coordinate system
Z0
C0
L0
C1
L1
C2
L2
C3
L3
3. Press the "Accept" softkey.
1. Press the "Milling", "Pocket" and "Rectangular pocket" softkeys.
The "Rectangular Pocket" input window opens.
2. Enter the following technology parameters:
T Miller_D8
3. Enter the following parameters:
Machined surface
Machining type
Machining position
X0
Y0
Z0
W
7.18 Example: Standard machining
Face C
Polar
0abs
0abs
16abs
90abs
16abs
180abs
16abs
270abs
16abs
D1 F 0.030 mm/tooth
Face C
Roughing (∇)
Single position
0abs
0abs
0abs
23
Creating a ShopTurn program
V 200 m/min
271