Programming technology functions (cycles)
8.3 Contour turning
Procedure
Parameters, G code program
PRG
Name of the program to be
generated
PL
Machining plane
RP
Retraction plane –
(only for machining
direction,
longitudinal, inner)
SC
Safety clearance
F
Feed (∇ or ∇∇∇)
FS
Finishing feedrate
(only for complete
machining: ∇ + ∇∇∇)
Residual
With subsequent residual
material
material removal
Yes
•
No
•
CONR
Name to save the updated blank
contour for residual material
removal – ("Yes", only for
residual material removal)
366
1.
The part program or ShopTurn program to be processed has been
created and you are in the editor.
2.
Press the "Contour turning" softkey.
3.
Press the "Grooving" softkey.
The "Grooving" input window opens.
mm
mm
*
*
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feed (∇ or ∇∇∇)
FS
Finishing feedrate
(only for complete
machining: ∇ + ∇∇∇)
S / V
Spindle speed or
constant cutting rate
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
mm/rev
mm/rev
rpm
m/min
Turning