Straight And Circular Machining; Straight Turning - Siemens SINUMERIK 840D sl Operating Manual

Parameter
T
D
F
S / V
α1
Other M function
14.5.3

Straight and circular machining

14.5.3.1

Straight turning

Use this function for simple, straight machining (e.g. face or longitudinal turning).
Procedure
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Description
Tool name
Cutting edge number
Feedrate
Spindle speed or constant cutting rate
Rotation of the coordinate system.
Input of machine functions
Refer to the machine manufacturer's table for the correlation between the meaning
and number of the function.
1. "Manual Machine" is active.
2. Press the "Straight circle" softkey.
3. Select the desired straight machining and press the "All axes" softkey
- OR -
Press the softkey "Straight X α"
- OR -
Press the softkey "Straight Z α"
4. Specify the desired value for the feedrate F.
- OR -
Press the "Rapid traverse" softkey.
The rapid traverse is displayed in field "F".
5. Enter the target position and, if required, the angle (α) for the axis or
axes to be traversed.
Working with Manual Machine
14.5 Simple workpiece machining
Unit
mm/min
mm/rev
rev/min
m/min
Degrees
713