End Face Machining (Transmit) - Siemens SINUMERIK 840D sl Commissioning Manual

MD24810 $MC_TRACYL_ROT_SIGN_IS_PLUS_1
= 1
MD24820 $MC_TRACYL_BASE_TOOL_1[ ]
[0] = 0
[1] = 0
[2] = 0
22.5.6

End face machining (TRANSMIT)

Function
Using the end face machining function (TRANSMIT), you can machine the end face of a
turned part.
Setting up
For general settings for transformations, please refer to Chapter "Cylinder surface
transformation (TRACYL) (Page 482)".
You can make additional settings in the following channel-specific machine data:
MD24100 $MC_TRAFO_TYPE_1
= 256
= 257
MD24200 $MC_TRAFO_TYPE_2
= 256
= 257
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Software option
You require the following software option in order to use this function:
"Transmit and peripheral surface transformation"
Machining without Y axis
Machining with Y axis
Machining without Y axis
Machining with Y axis
Configuring cycles
Sign of the rotary axis for the 1st TRACYL
transformation.
Vector of the basis tool for the 1st TRACYL
transformation.
End face machining, main spindle:
Transformation 1
End face machining, counterspindle:
Transformation 2
22.5 Turning
485