Siemens SINUMERIK 840D sl Commissioning Manual page 101

"slmahdconfig.ini" file
Standard configuration
[CondStopIcons]
Default icon = condwait.png
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
10 =
11 =
12 =
13 =
14 =
15 =
15 =
17 =
18 =
19 =
20 =
21 =
22 =
23 =
24 =
25 =
26 =
27 =
28 =
29 =
30 =
31 =
32 =
33 =
34 =
35 =
36 =
37 =
38 =
39 =
40 =
41 =
42 =
43 =
44 =
45 =
46 =
47 =
48 =
49 =
50 =
51 =
52 =
53 =
54 =
55 =
56 =
57 =
58 =
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
condstop.png ; No NC ready
condstop.png ; No mode group ready
condstop.png ; EMERGENCY STOP active
condstop.png ; Alarm with stop active
condstop.png ; M0/M1 active
condstop.png ; Block in SBL mode terminated
condstop.png ; NC stop active
condstop.png ; Read-in enable missing
condstop.png ; Feed enable missing
condwait.png ; Dwell time active
condwait.png ; Aux. function acknowledgment missing
condstop.png ; Axis enable missing
condwait.png ; Exact stop not reached
condwait.png ; Waiting for positioning axis
condwait.png ; Waiting for spindle
condwait.png ; Waiting for other channel
condstop.png ; Waiting for feedrate override
condstop.png ; Error in NC block
condstop.png ; Waiting for external NC blocks
condwait.png ; Waiting for synchronized action
condwait.png ; Block search active
condstop.png ; Spindle enable missing
condstop.png ; Axis feedrate override
condwait.png ; Waiting for tool change acknowledgment
condwait.png ; Gear step change
condwait.png ; Waiting for position control
condwait.png ; Waiting for thread cut
condwait.png ; Reserved
condwait.png ; Waiting for punching
condwait.png ; Waiting for safe operation
condwait.png ; No channel ready
condstop.png ; Oscillation active
condwait.png ; Axis replacement active
condwait.png ; Axis container rotation
condwait.png ; AXCT: Following axis active
condwait.png ; AXCT: Leading axis active
condwait.png ; AXCT: Follow-up active
condwait.png ; AXCT: Internal status change
condwait.png ; AXCT: Axis/spindle disable
condwait.png ; AXCT: Corr. motion active
condwait.png ; AXCT: Axis replacement active
condwait.png ; AXCT: Axis interpolator active
condwait.png ; Waiting for compile cycle
condwait.png ; Access to system variable
condstop.png ; Search target found
condwait.png ; Rapid retraction started
condwait.png ; AXCT: Wait for spindle stop
condwait.png ; Machine data match
condwait.png ; Axis replacement: Axis coupled
condwait.png ; Axis replacement: Liftfast active
condwait.png ; Axis replacement: New config active
condwait.png ; Axis replacement: AXCTSW active
condwait.png ; Axis replacement: Waitp active
condwait.png ; Axis in another channel
condwait.png ; Axis replacement: Axis is PLC axis
condwait.png ; Axis replacement: Axis is oscillating axis
condwait.png ; Axis replacement: Axis is Jog axis
condwait.png ; Axis replacement: Command axis
Customizing the "Machine" operating area
8.4 Configuring the channel operational message
95