Configuration Data - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics
18.7 Logbook
18.6.6

Configuration data

The machine-specific information is stored in the configuration data. This file saved in the
XML format provides the basis for further processing in EUNA.
● The data can be read by remote diagnostics.
● The data can also be transferred directly to EUNA, e.g. via network or USB FlashDrive.
Configuration data
The configuration data includes:
● Machine-specific data that is stored in the "Machine identity" dialog box
● Hardware/software versions that are stored in the "Versions" dialog box
● Options requiring licenses, which are stored in the "Licensing" dialog box
● Logbook, whose entries are stored in the "Logbook" dialog box
Storage path
Depending on how the drives have been configured, the configuration data can be stored in
the available directories.
See also
Machine identity (Page 327)
Adding hardware components (Page 334)
Licensing (Page 25)
Logbook (Page 336)
18.7 Logbook
The logbook provides an electronic machine history.
The time and date of commissioning is recorded in the logbook, and if the machine is
serviced, this can also be logged electronically. This helps to optimize the service.
Stored entries cannot be changed or deleted.
336
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)