Siemens SINUMERIK 840D sl Commissioning Manual page 660

Dialogs
4.2 Defining softkey menus
Assigning access level
Operators can only access information on this and lower access levels. The meanings of the
different access levels are as follows: ac0 is the highest access level and ac7 the lowest.
Security level
ac0
ac1
ac2
ac3
ac4
ac5
ac6
ac7
Example
//S(Menu1)
HS1=("NEW", ac6, se2)
HS2=("\\image1.png")
HS3=("Exit")
VS1=("sub screen form")
VS2=($85011, ac7, se2)
VS3=("Cancel", ac1, se3)
VS4=("OK", ac6, se1)
VS5=(SOFTKEY_CANCEL,,se1)
VS6=(SOFTKEY_OK,,se1)
VS7=(["\\image1.png","OEM
text"],,se1)
VS8=(["\\bild1.png",
$83533],,se1)
PRESS(HS1)
HS1.st="Calculate"
...
END_PRESS
42
Locked by
Reserved for Siemens
Password
Password
Password
Keylock switch position 3
Keylock switch position 2
Keylock switch position 1
Keylock switch position 0
; Start identifier of softkey menu
; Define softkey HS1, assign the label "NEW",
protection level 6, and the status "disabled"
; Assign a softkey to the graphic
; Define softkey VS2, assign the text from the
language file, protection level 1, and the status
"disabled".
; Define softkey VS3, assign the label "Cancel",
protection level 1 and the status "highlighted".
; Define softkey VS4, assign the label "OK",
protection level 6 and the status "visible"
; Define cancel standard softkey VS5 and assign
the status "visible"
; Define OK standard softkey VS6 and assign the
status "visible"
; Define softkey VS7, assign an image, assign the
label "OEM Text" and the status "visible"
; Define softkey VS8, assign an image, assign text
from language file and the status "visible"
; Method start identifier
; Assign a label text to the softkey
; Method end identifier
Range
Machine manufacturer
Service
User
Programmer, machine setter
Qualified operator
Trained operator
Semi-skilled operator
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1