Axis-Specific Machine Data In Safety Integrated - Siemens SINUMERIK 840D sl Commissioning Manual

Searching for machine data
21.1.3

Axis-specific machine data in Safety Integrated

The axis machine data is listed in the "Axis MD" window and can be changed.
Copying and confirming Safety Integrated data for certain axes
Select the desired axis using the "Axis +" or "Axis -" softkey for which the Safety Integrated
data is to be copied and confirmed.
Screen view
The machine data display is split into two halves:
● In the upper part of the screen view, the machine data that are important for
● Safety Integrated machine data are displayed in the lower part of the screen view.
Changing the screen view
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
1. Press the "Search" softkey, enter the machine data number being
searched for in the window that opens or a character string that is being
searched for an press the "OK" softkey.
2. Press the "Continue search" softkey if the text position found does not
correspond to the required machine data.
3. Press the "Go to start" or "Go to end" softkey to set the cursor to the
beginning or to the end of the displayed data.
4. Press the "Search" softkey if you wish to change the search term.
commissioning are displayed; however, they do not involve Safety Integrated machine
data.
1. Press the "MD selection" to change into the full screen view.
The selection of Axis MD is displayed over the complete screen.
2. Press the "SI-MD" softkey.
The Safety Integrated Axis MD are displayed over the complete screen.
3. Press the "SI + MD selection" softkey.
You return to the common view split in two of the general machine data
and the Safety Integrated machine data.
21.1 Displaying machine data and parameters
Safety Integrated
433