Configuring The Function Display At User-Specific Keys (U Keys) - Siemens SINUMERIK 840D sl Commissioning Manual

HT 8

25.3 Configuring the function display at user-specific keys (U keys)

</context>
</TS>
See also
Range of alarms (Page 217)
25.3 Configuring the function display at user-specific keys (U keys)
Function
Active functions can be displayed at the configurable user keys via the PLC. For instance,
small LEDs can be emulated on the softkeys.
You configure the function in the "slckcpf.ini" file.
Interface signals
The PLC bits are in the output image of the PLC-HT 8 interface and are analog to those in
the input image.
Signals to the MCP1 (or MCP2)
Interface PLC → HT 8
Byte
AB n + 1
AB n + 4
AB n + 5
600
<remark>User key 2</remark>
<chars>10</chars>
<lines>2</lines>
<languageIndependent>true</languageIndependent>
</message>
<message>
.....
</message>
Bit 7 Bit 6
U4
U9 U10
U8
Bit 5 Bit 4 Bit 3
U3 U2
U11 U12 U13
U7 U6 U5
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Bit 2 Bit 1 Bit 0
U1
U14 U15 U16
SINUMERIK Operate (IM9)