Sinumerik Operate Exiting - Siemens SINUMERIK 840D sl Commissioning Manual

SINUMERIK Operate on PC/PCU

24.4 SINUMERIK Operate exiting

Procedure
24.4 SINUMERIK Operate exiting
Procedure
592
1. Select the "Start-up" operating area.
2. Press the "HMI" softkey and the ">>" softkey.
Press the vertical softkey "NCU connection".
The "NCU Connection" window opens.
Enter the IP address of the NCU into the input field.
3. Press the "OK" softkey to confirm the data.
1. Press the <MENU SELECT> key on the operator panel.
OR:
Activate the <M> symbol on the touch panel.
External keyboard: Press the <F10> key.
2. Press the menu forward key.
External keyboard: Press the <Shift> + <F9> keys.
3. Press the "EXIT" softkey.
External keyboard: Press <F8>
• on the PCU to terminate SINUMERIK Operate and the Windows
system.
• If you started SINUMERIK Operate operating software on the PCU
in the service mode, then only the operating software is exited.
• On the PC itself, only SINUMERIK Operate is exited.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)