Siemens SINUMERIK 840D sl Commissioning Manual page 887

3.6.5 WinSCP and PuTTY
Use
The programs WinSCP and PuTTY are freely-available open source programs for Windows.
WinSCP is intended especially for transferring files from and to Linux systems, PuTTY for
the remote operation of a command shell.
● WinSCP can be downloaded via the following link: http://winscp.net/eng/download.php
● PuTTY, by contrast, offers a complete command shell.
With both programs, a service technician can log onto the NCU and carry out service tasks.
The username 'manufact' with the password 'SUNRISE' is available for the Siemens service
technician.
Starting WinSCP
WinSCP is started from Windows after the service technician has logged onto the NCU with
which he is connected using the corresponding authorization (e.g. as user "manufact" with
password "SUNRISE").
From the "Commands" menu, select "Open terminal" to open a command shell. There you
can carry out the service commands in the usual way.
NCU operating system (IM7)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
(http://winscp.net/eng/download.php) (Installation Package).
WinSCP also offers a "command shell" that is limited so that commands can be issued,
but no callbacks can be answered.
PuTTY web page: http://www.chiark.greenend.org.uk/~sgtatham/putty
(http://www.chiark.greenend.org.uk/~sgtatham/putty)
Service and diagnostics
3.6 System diagnostics
91