Configuring The "Details" Window - Siemens SINUMERIK 840D sl Commissioning Manual

Tool management
12.2 Configuring the user interface
12.2.10

Configuring the "Details" window

<DETAILSCONFIGURATION> tag
In the tag <DETAILSCONFIGURATION> you can make the settings at the "Detail" window:
Entries
ShowToolNumber
UseAxisNameInLength
ShowBaseLength
ShowYAxis
Example
<DETAILSCONFIGURATION>
</DETAILSCONFIGURATION>
12.2.11 Assigning a name for magazines and magazine locations
<MAGAZINEPLACENAMECONFIGURATION> tag
The entries to assign dedicated magazine location names are located in the
<MAGAZINEPLACENAMECONFIGURATION> tag. Magazine locations can be displayed
with texts. Instead of the identifier, e.g. 1/5 for the first magazine, location five, the configured
text is then output in the tool lists.
Entries
MAGAZINE_XXX
PLACE_XXX
Name
168
Meaning
The tool number is displayed in the upper right field of the "Detail"
window.
The tool lengths are displayed with axis identifiers, e.g. length X instead
of length 1.
If no data is specified, then the setting is taken from the tool lists.
The basis length is displayed in the "Detail" window (AdaptLength1,
AdaptLength2 and AdaptLength3).
If no data is specified, then the setting is taken from the tool lists.
The Y axis is displayed in the "Detail" window.
If no data is specified, then the setting is taken from the tool lists.
<ShowToolNumber value="true" type="bool" />
Meaning
XXX stands for the magazine number.
XXX stands for the location number.
Text identifier of the magazine location.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)