Siemens SINUMERIK 840D sl Commissioning Manual page 60

General settings
6.2 Set date/time
The following applies:
Time symbol:
h
hh
H
HH
m
mm
s
ss
AP
Procedure
54
Description of the entry
Single or double digit hour (0 - 23 or 1 - 12 for am/pm).
Double digit hour, with leading zero (00 - 23 or 01 - 12 for am/pm).
Single or double digit hour (0 - 23 for AM/PM).
Double digit hour, with leading zero (00 - 23 for AM/PM).
Single or double digit minute (0 - 59).
Double digit minute, with leading zero (00 - 59).
Single or double digit second (0 - 59).
Double digit second, with leading zero (00 - 59).
Display of the time of day:
1. Select the "Start-up" operating area.
2. Press the "HMI" softkey.
3. Press the "Date/Time" softkey.
The "Set Date and Time" window opens.
4. Select the required formats for the date and time with the <SELECT>
key in the "Format" field.
5. For SINUMERIK Operate in the NCU: In the entry fields after "new"
enter the actual date and time.
For SINUMERIK Operate on PCU/PC: In the entry fields after "new NCU
+ PCU" enter the actual date and time.
6. Confirm the entry with the "OK" softkey.
The new date and time details are accepted and output in the fields
"actual NCU" and "actual PCU".
AM or am = before midday or
PM or pm = after midday
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)