General Procedure - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics
18.14 Trace
Cyclic events
Non-cyclic events
Starting a session
● Recording using a trigger
● Manually starting and stopping a trace
Analyzing the result
The following functions are available to analyze the result:
● Scaling characteristic graphs
● Zooming characteristic graphs
● Defining a characteristic range using markers
18.14.1

General procedure

Sequence
● Create a trace session file as follows:
– Select the variable and define its representation type.
– Set the graphics window, and the save mode
– Set the trigger property to define the start and end of recording
● Save the recording and its associated properties that have been set
● Analyze the result by making the settings for the display in order to view additional details
(e.g. zoom in, scroll, select section, etc.)
380
Interpolation clock cycle (IPO clock cycle)
PLC cycle OB1
Position control clock cycle (servo clock cycle)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)