Siemens SINUMERIK Series Function Manual page 380

M1: Kinematic transformation
6.4 TRAANG oblique angle transformation (option)
Example of an axis configuration
The configurations highlighted in the figure above apply when
Transformation channel axes
● MD24110 $MC_TRAFO_AXES_IN_1[0]=4; channel axis number of the inclined axis
● MD24110 $MC_TRAFO_AXES_IN_1[1]=1; channel axis number of the longitudinal axis
● MD24110 $MC_TRAFO_AXES_IN_1[2]=0 ; ---
380
is active.
TRAANG
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions