Tracyl Cylinder Surface Transformation (Option) - Siemens SINUMERIK Series Function Manual

M1: Kinematic transformation

6.3 TRACYL cylinder surface transformation (option)

6.3 TRACYL cylinder surface transformation (option)
The TRACYL transformation permits the machining of cylinder jacket curves (grooves) on
turning machines. The machine kinematics must correspond to the cylinder coordinate
system:
● One, two or three linear axes and one rotary axis
● The linear axes must be oriented perpendicular to each other
● The rotary axis must be oriented parallel to one of the linear axes
Figure 6-7
Note
For active transformation, the names of the involved machine, channel and geometry axes
are different:
• MD10000 $MN_AXCONF_MACHAX_NAME_TAB (machine axis name)
• MD20080 $MC_AXCONF_CHANAX_NAME_TAB (channel axis name)
• MD20060 $MC_AXCONF_GEOAX_NAME_TAB (geometry axis name)
366
TRACYL cylinder surface transformation
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions