Siemens SINUMERIK Series Function Manual page 837

Output 40
146 Disable analog NCK inputs
Input 8
147 Setting screen form for analog NCK inputs
Input 8
148, 149 Setting value from PLC for analog input 1 of the NCK
150, 151 Setting value from PLC for analog input 2 of the NCK
152, 153 Setting value from PLC for analog input 3 of the NCK
154, 155 Setting value from PLC for analog input 4 of the NCK
156, 157 Setting value from PLC for analog input 5 of the NCK
158, 159 Setting value from PLC for analog input 6 of the NCK
160, 161 Setting value from PLC for analog input 7 of the NCK
162, 163 Setting value from PLC for analog input 8 of the NCK
166 Overwrite screen form for analog NCK outputs
Output 8
167 Setting screen form for analog NCK outputs
Output 8
168 Disable analog NCK outputs
Output 8
170, 171 Setting value from PLC for analog output 1 of NCK
172, 173 Setting value from PLC for analog output 2 of NCK
174, 175 Setting value from PLC for analog output 3 of NCK
176, 177 Setting value from PLC for analog output 4 of NCK
178, 179 Setting value from PLC for analog output 5 of NCK
180, 181 Setting value from PLC for analog output 6 of NCK
182, 183 Setting value from PLC for analog output 7 of NCK
184, 185 Setting value from PLC for analog output 8 of NCK
Description of signals from PLC to NC
DB10
DBB0, 122, 124, 126, Disable digital NCK inputs
128
Edge evaluation: No
Signal state 1 or The digital input of the NCK is disabled by the PLC. It is thus set to "0" in a defined way in the
edge change 0 → 1 control.
Signal state 0 or The digital input of the NCK is enabled. The signal state applied at the input can now be read
edge change 1 → 0 directly in the NC part program.
Corresponding to .... DB10 DBB1 (Setting by PLC of the digital NCK inputs)
DB10 DBB60 (actual value for digital NCK inputs)
MD10350 $MN_FASTIO_DIG_NUM_INPUTS
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Output 39 Output 38
Input 7 Input 6
Input 7 Input 6
Output 7 Output 6
Output 7 Output 6
Output 7 Output 6
Signal(s) updated: Cyclic
Output 37 Output 36
Input 5 Input 4
Input 5 Input 4
Output 5 Output 4
Output 5 Output 4
Output 5 Output 4
Z2: NC/PLC interface signals
18.1 Digital and analog NCK I/Os (A4)
Output 35 Output 34
Input 3 Input 2
Input 3 Input 2
Output 3 Output 2
Output 3 Output 2
Output 3 Output 2
Output 33
Input 1
Input 1
Output 1
Output 1
Output 1
837