Siemens SINUMERIK Series Function Manual page 78

B3: Distributed systems - 840D sl only
2.1 Brief description
Figure 2-3 Fig. 2: Location after rotation by one position
Parameterization (schematic)
NCU1
NCU2
NCU1
NCU2
78
Programmed channel axes in the part programs of both NCUs: X, Z, S1
Local:
Axis container:
Local:
Axis container:
Initial setting
(Fig. 1)
Diagram showing the channel axes programmed in the part program:
X → X1 and Z → Z1
S1 → MS2
Diagram showing the channel axes programmed in the part program:
X → X1 and Z → Z1
S1 → MS3
General
Machine axes defined in the NCU:
X1, Z1
MS1, MS2
Machine axes defined in the NCU:
X1, Z1
MS3, MS4
Rotation of the MTR (rotary table) rotary
Machining station 1: X1, Z1, MS2
Machining station 2: X1, Z1, MS2
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
axis by one position
(Fig. 2)
X → X1 and Z → Z1
S1 → MS1
X → X1 and Z → Z1
S1 → MS2 (link axis)
Extended Functions