Siemens SINUMERIK Series Function Manual page 844

Z2: NC/PLC interface signals
18.1 Digital and analog NCK I/Os (A4)
200,
201
202,
203
204,
205
206,
207
208,
209
210,
211
212,
213
214,
215
216,
217
218,
219
220,
221
222,
223
224,
225
Description of signals from NC to PLC
DB10
DBB60, 186 - 189 Actual value for digital NCK inputs
Edge evaluation: No
Signal state 1 or Signal level "1" is active at the digital hardware input of the NCK.
edge change 0 → 1
Signal state 0 or Signal level "0" is active at the digital hardware input of the NCK.
edge change 1 → 0
Special cases, The influence of interface signal:
errors, ...... DB10 DBB0 (Disable digital NCK inputs)
is ignored for the actual value.
Corresponding to .... DB10 DBB0 (Disable digital NCK inputs)
MD10350 $MN_FASTIO_DIG_NUM_INPUTS
844
Actual value for analog input 4 of NCK
Actual value for analog input 5 of NCK
Actual value for analog input 6 of NCK
Actual value for analog input 7 of NCK
Actual value for analog input 8 of NCK
Setpoint for analog output 1 of NCK
Setpoint for analog output 2 of NCK
Setpoint for analog output 3 of NCK
Setpoint for analog output 4 of NCK
Setpoint for analog output 5 of NCK
Setpoint for analog output 6 of NCK
Setpoint for analog output 7 of NCK
Setpoint for analog output 8 of NCK
Signal(s) updated: Cyclic
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions