Siemens SINUMERIK Series Function Manual page 422

M1: Kinematic transformation
6.10 Examples
MD24810
$MC_TRACYL_ROT_SIGN_IS_PLUS_1 =
FALSE
MD24820 $MC_TRACYL_BASE_TOOL_1 [0] =
0.0
MD24820 $MC_TRACYL_BASE_TOOL_1 [1] =
0.0
MD24820 $MC_TRACYL_BASE_TOOL_1 [2] =
0.0
; activation TRACYL(40.0)
; Programming in Y and Z, see the following example
; Return to rotational operation
TRAFOOF
Programming with groove wall offset
(TRAFO_TYPE_n=513)
Contour
It is possible to produce a groove which is wider than the tool by using address OFFN to
program the compensation direction (G41, G42) in relation to the programmed reference
contour and the distance of the groove side wall from the reference contour (see following
figure).
422
; Rotary axes turns
; tool center distance in X
; tool center distance in Y
; tool center distance in Z
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions