Tool List For Multitool - Siemens SINUMERIK 840D sl Operating Manual

Manage tools
13.14 Working with Multitool
The multitool itself has two or more locations to accept tools. The tools are directly mounted
on the multitool. The multitool is located at a location in the magazine.
Geometrical arrangement of the tools on the multitool
The geometrical arrangement of the tools is defined by the clearance between the locations
on the multitool.
The clearance between the locations can be defined as follows:
● Using the multitool location number or
● using the angle of the multitool location
If angle is selected here, then the value of the angle must be entered for each multitool location.
Regarding loading and unloading in a magazine, the multitool is treated as a single unit.
13.14.1

Tool list for multitool

If you work with a multitool, the tool list is supplemented by the column for the multitool location
number. As soon as the cursor lands on a multitool in the tool list, certain column headings
change.
Column header
Location
MT loc.
TYPE
Multitool name
Figure 13-10 Tool list with multitool in the spindle
Procedure
294
Meaning
Magazine/location number
Multitool location number
Symbol for multitool
Name of the multitool
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
The "Tool list" window is opened.
Operating Manual, 05/2017, A5E40869190
Grinding