Changing The Contour; Overview; Modifying A Contour Element - Siemens SINUMERIK 840D sl Operating Manual

Parameter
CA
Additional commands
Contour element "Pole"
Parameters
Z
Y
Contour element "End"
The data for the transition at the contour end of the previous contour element is displayed in
the "End" parameter screen.
The values cannot be edited.
9.1.4

Changing the contour

9.1.4.1

Overview

Function
You can change a previously created contour later.
Individual contour elements can be
● added,
● changed,
● inserted or
● deleted.
9.1.4.2

Modifying a contour element

Procedure for changing a contour element
Grinding
Operating Manual, 05/2017, A5E40869190
Description
Grinding allowance
● Grinding allowance to right of contour
● Grinding allowance to left of contour
Additional G-code commands
Description
Position pole (abs)
Position pole (abs)
1. Open the part program to be machined.
2. Open the contour.
Programming technology functions
9.1 Programming contours
Unit
mm
Unit
mm
Degrees
209