Deleting Multitool; Loading And Unloading Multitool - Siemens SINUMERIK 840D sl Operating Manual

Manage tools
13.14 Working with Multitool
13.14.5

Deleting multitool

Procedure
13.14.6

Loading and unloading multitool

Procedure
Loading a multitool into the magazine
Loading a multitool into a magazine
298
1. The tool list opens.
2. Position the cursor on the multitool that you wish to delete.
3. Press the "Delete multitool" softkey.
The multitool with all of the tools that are located in it is deleted.
1. The tool list is opened.
2. Position the cursor on the multitool that you wish to load into the
magazine.
3. Press the "Load" softkey.
The "Load on" window opens.
The "Locat." field contains the number of the first empty magazine
location by default.
4. Press the "OK" softkey to load the multitool into the suggested
empty location.
- OR -
Enter the location number you require and press the "OK" softkey.
The multitool together with the tools in it is loaded to the specified
magazine location.
2. Position the cursor on the desired empty magazine location.
3. Press the "Load" softkey.
The "Load with" window opens.
4. Select the desired multitool.
5. Press the "OK" softkey.
Operating Manual, 05/2017, A5E40869190
Grinding