Sequence
1. Start of the cycle at the current position of the oscillating axis.
2. Traversing of the infeed axis to the infeed depth at the start P1 <S_I> with the feedrate for
infeed P5 <S_R>.
3. Sparking out with the sparking-out time P7 <S_P>.
4. Traversing of the oscillating axis with the grinding width P4 <S_A> as travel path and the
feedrate for transverse infeed P6 <S_F>.
5. Traversing of the infeed axis to the infeed depth at the end P2 <S_J> with the feedrate for
infeed P5 <S_R>.
6. Sparking out with the sparking-out time P7 <S_P>.
7. Traversing of the oscillating axis with the grinding width P4 <S_A> as travel path to the
starting point and the feedrate for transverse infeed P6 <S_F>.
The sequence cannot be interrupted with a single block.
The sequence is repeated until the total infeed depth P3 <S_K> has been reached. The last
stroke is then distributed unevenly.
Figure 9-9
Grinding
Operating Manual, 05/2017, A5E40869190
Total infeed depth reached with infeed at the second reversal point
Programming technology functions
9.4 Oscillating cycles (CYCLE4071 ... CYCLE4079)
235