Reactivating A Multitool - Siemens SINUMERIK 840D sl Operating Manual

Manage tools
13.14 Working with Multitool
13.14.9

Reactivating a multitool

A multitool and tools located on the multitool can be disabled independently of one another.
If a multitool is disabled, the tools of the multitool can no longer be loaded for use by means
of a tool change.
If only one tool on a multitool has a set monitoring function and the tool life or the workpiece
count has expired, the tool and the multitool on which the tool is located are disabled. The
other tools on the multitool are not disabled.
If several tools with monitoring are mounted on the multitool and the tool life or the workpiece
count has expired for one tool, only this tool is disabled.
Reactivating
If a tool with an expired tool life or workpiece count that is mounted on a multitool is reactivated,
the tool life or workpiece count is set to the target value for this tool and the tool and the multitool
are enabled again.
300
4. Press the "Relocate" softkey.
The "... relocate from location ... to location ..." window is displayed.
The "Location" field is pre-assigned with the number of the first
empty magazine location.
5. Press the "OK" softkey to relocate the multitool to the suggested
magazine location.
- OR -
Enter the required magazine number in the "...magazine" field and
the required magazine location number in "Location" field.
Note:
Please observe the information provided by the machine manufac‐
turer.
Press the "OK" softkey.
The multitool with the tools is relocated to the specified magazine
location.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Operating Manual, 05/2017, A5E40869190
Grinding