Displaying And Editing Seat-Related Fine Offset - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine
4.5 Zero offsets
Note
Activate settable zero offsets
The settable zero offsets must first be selected in the program before they have an impact.
4.5.6

Displaying and editing seat-related fine offset

In the window "Work offset - GFrame1 ... GFrame..." all position-related offset values (seat
offsets) are displayed.
Translatory and rotary offsets are displayed.
Procedure
Note
Activating seat-related fine offsets
The seat-related work offsets must first be selected in the program before they are activated.
80
3. Press the "G54 ... G599" softkey.
The "Work offset - G54 ... G599 [mm]" window opens.
Note
The labeling of the softkeys for the settable work offsets varies, i.e. the
settable work offsets configured on the machine are displayed (examples:
G54 ... G57, G54 ... G505, G54 ... G599).
Please observe the information provided by the machine manufacturer.
4. You can edit the values directly in the table.
1. Select the "Parameter" operating area.
2. Press the "Work offset" softkey.
3. Press softkey "GFrame1...GFrame2".
Window "Work offset - GFrame1 ... GFrame2" is opened.
Note:
The labeling of the softkeys for the seat-related fine offsets varies, i.e. the
seat-dependent work offsets configured at the machine are displayed
(examples: GFRAME1...GFRAME1, GFRAME1...GFRAME2,
GFRAME1...GFRAME100).
Here, please observe the information provided by the machine manufac‐
turer.
4. You can edit the values directly in the table.
Operating Manual, 05/2017, A5E40869190
Grinding